Edirol CG-8 Repair Guide

The Edirol CG-8 is a "visual synthesiser" made by Roland in 2005.

Hardware

VIA EPIA M Motherboard

The CG-8 uses a VIA EPIA M mini ITX PC motherboard produced in the early to mid-2000s. It uses the VIA CLE266 chipset and comes with 512MB RAM in its single UDIMM memory slot and a 2.5in 40Gb hard drive, connected via IDE. The Retro Web provides comprehensive information about the board and notes that - like many computers of its era - it is prone to "faulty or leaking electrolytic capacitors".

• VIA EPIA-M at The Retro Web

512Mb RAM

The RAM is in the form of a single 512Mb DDR UDIMM PC2100. According to the user manual, the motherboard has a maximum RAM size of 1GB.

Diagnostics

• • Before doing any work on the CG-8 you should back up and clone the internal hard drive.** It is strongly recommended that you don't do any diagnostic work with your original hard drive in place.