Edirol CG-8 Repair Guide: Difference between revisions
| Line 3: | Line 3: | ||
== Opening the Edirol CG-8 Case == | == Opening the Edirol CG-8 Case == | ||
== Motherboard == | == Hardware == | ||
=== VIA EPIA M Motherboard === | |||
The Edirol CG-8 uses a VIA EPIA M mini ITX PC motherboard produced in the early to mid-2000s. It uses the VIA CLE266 chipset and comes with 512MB RAM in its single UDIMM memory slot and a 2.5in 40Gb hard drive, connected via IDE. The Retro Web provides comprehensive information about the board and notes that - like most computers of its age - it is prone to "faulty or leaking electrolytic capacitors". | The Edirol CG-8 uses a VIA EPIA M mini ITX PC motherboard produced in the early to mid-2000s. It uses the VIA CLE266 chipset and comes with 512MB RAM in its single UDIMM memory slot and a 2.5in 40Gb hard drive, connected via IDE. The Retro Web provides comprehensive information about the board and notes that - like most computers of its age - it is prone to "faulty or leaking electrolytic capacitors". | ||
Revision as of 01:06, 15 May 2025
The Edirol CG-8 is a visual synthesiser made by Roland in 2006.
Opening the Edirol CG-8 Case
Hardware
VIA EPIA M Motherboard
The Edirol CG-8 uses a VIA EPIA M mini ITX PC motherboard produced in the early to mid-2000s. It uses the VIA CLE266 chipset and comes with 512MB RAM in its single UDIMM memory slot and a 2.5in 40Gb hard drive, connected via IDE. The Retro Web provides comprehensive information about the board and notes that - like most computers of its age - it is prone to "faulty or leaking electrolytic capacitors".
RAM
The RAM is in the form of a single 512Mb DDR UDIMM PC2100. The board claims a maximum RAM size of 1GB, although I have yet to try more than 512MB.